CONNECTION
Before making any connections, switch off all the equipment and disconnect it from the mains.
It is recommendable to read the whole manual before connecting the devices.
Respect the connector colour code when making the audio and video connections.
Connect the DTT receiver to a television with just one type of cable.
The general connection procedure is as follows:
-
Connect the antenna to the RF IN tuner input.
-
Connect the audio and video output signal to the television with the scart output (SCART TV), or by
using the HDMI output and the appropriate cable in each case.
-
Once the connections have been made according to your needs, connect the devices to the mains
and switch them on.
INSTRUCTIONS FOR USE
START UP
When you switch the DTT receiver on for the first time, a quick start menu will appear on the screen which
makes setting up the receiver and channel tuning easier.
Once the initial configuration has been chosen, select OK and the automatic channel search will begin.
- 6 -
EN
