FR
- 2 -
- 2 -
EN
EN
DESCRIPTION
- Power sequencer.
- Sequential on/off.
- Selectable switch-on delay between outputs.
- Possibility of remote on/off through contact closure.
CONTROLS AND FUNCTIONS
FRONT PANEL
8
7
6
5
4
3
2
1
1
3
2
4 5
6
8
7
1
3
2
4
1.-
POWER
: sequencer operation LED indicator.
2.-
START AUTO:
this button starts the automatic on/off sequence of the outputs.
3.- LED operation indicator light for sequential/manual mode. This indicator will remain on whenever you
are performing the on/off sequence of the outputs programmed on the device. When this indicator is
off, the outputs can be turned on or off manually using the buttons assigned to each output on the front
of the sequencer.
4.-
TIME:
display that shows the setting in auto mode. This value can be set to 0, indicating that the
sequence mode is disabled; or it can be a number between 1 and 9, indicating a time interval. The value
1 corresponds to 0.5 seconds and the value 9 to 4.5 seconds, each increment/decrement unit of this
value varies the time by 0.5 seconds.
5.-
+/-:
buttons to increase/decrease the activation time interval of the outputs for auto mode.
6.- Output status LEDs. This LED will remain green when the corresponding output is activated. This LED
flashes to indicate which output is being set.
7.- Display that shows the voltage of the electrical network at all times.
8.- Buttons for activating/deactivating each output in manual mode.
