SAFETY RECOMMENDATIONS
- Do not open the equipment under any circumstances.
- Make sure that the devices are at least 50 cm away from inflammable substances or elements.
- Do not look at the laser beams from a distance of less than 15 cm or for more than 10 seconds of direct
radiation, to avoid serious damage to eyes.
- Switch the equipment off for 15 minutes every 2 hours to avoid overheating.
- Do not continually switch the equipment on and off as this could decrease its useful life.
- Only use this equipment in covered and refrigerated spaces.
- Do not move or manipulate the equipment while it is connected to the mains and operating.
- Do not modify the lighting elements of the equipment without technical supervision or with material that
has not been guaranteed by the supplier.
TECHNICAL SPECIFICATIONS
PAR-18L
CHARACTERISTICS
Flat PAR spotlight RGB.
Automatic mode, static mode, sound activation and master/slave mode.
Colour, dimmer, strobe adjustment and speed adjustable via DMX control
console.
Microphone incorporated.
LED
18 x 1 W, 3 in 1
DMX CHANNELS
7
INPUTS
DMX IN, 3-pin XLR
OUTPUTS
DMX OUT, 3-pin XLR
CONTROLS
Configuration screen
POWER SUPPLY
100-240 V AC, 20 W
DIMENSIONS
190 x 190 x 130 mm depth
ACCESSORIES
Adjustable fixing mount
Remote control
- 7 -
EN
