FONESTAR MX-862, Инструкция по эксплуатации

Страница: 5 / 12

REAR PANEL
1.- Power supply input 230/115 V AC.
2.- TONE : closes the contacts among one of the preset tone terminals (1-4) and the COM terminal in order
to play the corresponding tone.
3.- VCA : remote volume control per channel. Connect an external potentiometer between the terminals
R and COM for the right channel and between the L and COM channels for the left channel in order
to remotely control the volume of both the output channels.
For more information, consult the Remote Volume Control section.
4.- General purpose contacts which are activated when there is a priority activated.
5.- OUTPUT : line level unbalanced stereo master output, 2 x RCA connectors.
6.- OUTPUT : line level balanced stereo master output, 2 x XLR connectors.
7.- INPUT 5-8 : stereo aux inputs, 2 x RCA connectors.
8.- VOL : direct output volume control.
9.- OUT : balanced direct output, 6.3 mm stereo jack connector.
10.- INPUT 1-4 : mic./line inputs which use a combo connector (XLR and 6.3 mm stereo jack), accepting
balanced and unbalanced microphone signals of 30-600 Ω and balanced electret condenser
microphones that require 48 V phantom power supply, present in pins 2 and 3 of the XLR connector.
They also accept line level signals, balanced or unbalanced from mixers, audio players, etc.
11.- MIC/48 V/LINE : input sensitivity switches. They have 3 positions:
MIC : in this position, low impedance dynamic microphones 30-600 Ω can be connected to inputs 1 to 4.
48 V : in this position, electret condenser microphones that require 48 V phantom power supply can be
connected to inputs 1 to 4.
LINE : in this position, audio sources such as CD players, audio players etc. can be connected to inputs
1 to 4.
- 5 -
EN