FONESTAR MX-862, Инструкция по эксплуатации

Страница: 7 / 12

INSTALLATION AND CONNECTION
- Make the connections with the mixer/preamplifier and all the components of the installation switched off
and disconnected from the power supply.
- Connect the audio devices or required microphones to the corresponding inputs.
- Check that the direct input and output volume controls are at their minimum.
- Power the mixer/preamplifier mod. MX-862 using the AC mains socket.
- Once the connections have been made according to your needs, connect the devices to the mains supply
and switch them on. After use, do not forget to switch off and disconnect the device from the power supply.
REMOTE VOLUME CONTROL
It is possible to control the volume of both output channels remotely. In order to do so, connect two
potentiometers in the VCA terminals on the rear panel of the mixer in the following way:
EN
- 7 -