FONESTAR MX-4000, Инструкция по эксплуатации

Страница: 6 / 12

- 6 -
CONNECTION
Make the connections with the amplifier and all the system components switched off and disconnected
from the power supply.
Firstly, connect the audio sources to the inputs. For example, connect a dynamic microphone to the CH1
input and select the MIC position on the input sensitivity selector. If you use a pre-amplified table
microphone, select the LINE position.
Depending on the speaker zones that you are going to use, connect each Zone output terminal, line out
Bal. /Unbal. to the line 1 input amplifier. Then connect the speakers to the amplifiers correctly.
Once the connections have been made according to your needs, connect the system to the mains and
switch it on. After use, do not forget to switch it off and disconnect the system from the mains.
ES
EN
MX-4000_MANUAL_(EN)_20180316_Maquetación 1 16/3/18 9:20 Página 6