AM/FM TUNER SECTION
18.
AM/FM radio tuner information screen.
19.
CD/TUNER
: choose one of the two audio sources, the CD/USB/SD/PM3 player or the AM/FM radio
tuner. Only one of the source outputs can be used at a time.
20.
BAND
: choose either AM or FM.
21.
SLEEP
: activates a countdown of 90 minutes and when it reaches the end, it turns off. The amount of
time can be changed by pressing the SLEEP button repeatedly, each time it is pressed the countdown
decreases by 10 minutes. After choosing the required time, the word SLEEP disappears from the screen
in 5 seconds.
22.
DOWN
: in radio mode, one long press starts searching through the stations downwards numerically.
23.
UP
: in radio mode, one long press starts searching through the stations upwards numerically.
24.
ME-DOWN
: choose the memorized station previous to the current one.
25.
IR:
infra-red remote control sensor.
26.
TUNER:
LED radio ‘on’ indicator.
27.
ME-UP
: choose the memorized station following the current one.
28.
1 to 5
: buttons to choose the memorized stations from 1 to 5.
29.
+5: Increases by 5 the station number selected with the 1 to 5 buttons. In this way it is possible to
choose from the memorized stations 6 to 10.
30.
MEMORY
: this is the button used to memorize the favourite stations. 30 FM stations can be memorized
and 10 AM. To memorize a station, first it has to be tuned (manually or automatically). Then, press the
MEMORY button and choose the memory number where you want it to be saved using the numbers
(1 to 10) on the front panel of the remote control. Press the memory button again and the tuned station
number is saved in the chosen memory.
BACK PANEL
1.-
AM LOOP
: AM aerial input. This normally has a loop shape.
2.-
75Ω FM
: FM aerial input. The impedance of this is aerial is 75 Ω.
3.-
TUNER OUT
: radio tuner output. RCA connectors.
4.-
CD OUT
: CD/USB/SD/MP3 player output. RCA connectors.
5.-
VIDEO
: video output.
6.- 115/230 V AC, 50 Hz power supply power point.
7.- Power supply voltage selector.
- 5 -
EN
