Join the rest of the mid-treble loudspeakers to each other in the same way. Join the front first, and then the
back.
The tilt of the mid-treble loudspeakers can be adjusted to vary the coverage angle and achieve uniform audio
in the audience zone.
The tilt can be regulated with the back links between 0º and 10º in 2º at a time with respect to the previous
loudspeaker.
To achieve a tilt of approximately 5º from the first loudspeaker to the subwoofer and up to a maximum of 10º
between the mid-treble loudspeakers. In other words, to achieve a maximum tilt of 35º.
2) FLOOR
The line array can also be assembled on the floor using the subwoofer as a base and the mid-treble
loudspeakers on top. This is the easiest way to set them up and the most suitable if you do not have any way
of hanging them.
To connect the subwoofer and the loudspeakers together you have to follow the same procedure as before.
Use the front and back links in the same way to join the subwoofer and the mid-treble loudspeakers. The
loudspeaker tilt can be regulated to vary the coverage angle between 0º and 10º in 2º at a time.
- 9 -
EN
ARRAY-530_MANUAL_(EN)_20170704_Maquetación 1 5/7/17 9:09 Página 9
