Fondital gazelle techno classic, Инструкция по эксплуатации

Страница: 5 / 28

5
On/off Switch A:
Switch to position I to power on the radiator.
Timer clock B:
Used to switch the radiator on and off automatically at the set times
(see 1.3.4).
Temperature regulator C:
Used toset the desired room temperature.
The range that can be selected is from 5 °C (position 0) to 35 °C
(position 4).
Turn the knob fully anti-clockwise to activate the anti-frost mode,
whereby the radiator only comes on if the room temperature drops
below 5°C).
Power on light D:
This light shows when the radiator is powered on.
Burner minimum power light E:
This comes on when the radiator is on minimum power. Power
selection is an automatic function designed to reduce consumption.
When it binks it indicates an ambient probe fault.
Burner maximum power light F:
This comes on together with light E when the radiator is on maximum
power.
When it blinks it indicates a fault of the exchanger probe (5000 and
7000 models only).
Emergency shutdown light G:
This light flashes when there is a malfunction.
Overheating shutdown light H:
This comes on when the temperature exceeds the maximum value
allowed.
Reset button L:
If the radiator switches off due to a malfunction, press to reset and
resume operation (see 1.3.2).
If the radiator locks out again (both red lights on), do not reattempt to
start it up. Contact a Service Centre for assistance.
1. INSTRUCTIONS FOR THE USER
Always ensure to have first ingnition performed by professional personnel only
WARNING
1.1 CONTROL PANEL AND SETTINGS
A on/off main switch
B timer clock
C temperature regulator
D power on light (green)
E burner minimum power light (green)
F burner maximum power light (green)
G emergency shutdown light (red)
H overheating shutdown light (red)
L reset button
Press the right-hand side, as illustrated
above, in order to open the control panel
door.
fig. 1
C
A
F L
D
E H
G
B
fig. 1A
LED D LED E LED F LED G LED H
Electrically powered radiator GREEN n.i. n.i. n.i. n.i.
Operation at minimum power GREEN GREEN OFF OFF OFF
Operation at maximum power GREEN GREEN GREEN OFF OFF
Faulty ambient temperature probe GREEN GREEN L OFF OFF OFF
Faulty exchanger temperature probe (*) GREEN OFF GREEN L OFF OFF
Iono board block / air pressure switch block GREEN OFF OFF RED OFF
Safety thermostat/thermostats triggered GREEN OFF OFF OFF RED
(*) 5000 and 7000 models only
Key: OFF LED off - GREEN LED steady-on (with the indicated colour) - GREEN L LED on blinking (of the indicated colour) - n.i irrelevant LED state