Fondis Ulys 1100, Инструкция по установке/Руководство пользователя, Страница: 23 / 33

20
ATTENTION, THESE DIMENSIONS DO NOT INCLUDE THE REQUIRED THERMAL INSULATION. THEY
ARE TO BE MARKED UP BY THE THICKNESS OF THE INSULANT.
1.4.4. FLOOR
The appliance will be mounted on floors with a suitable bearing capacity and, if an existing
construction does not allow for such an installation, appropriate methods (for example a load
distribution plate) must be implemented.
1.5. VENTILATION OF THE HOOD
It is compulsory that the hood is ventilated using natural convection. The ventilation of the hood
will be carried out by one or more fresh air inlets under or at the back of the appliance and one or
more hot air outlets in the upper part of the hood.
NON COMPLIANCE WITH THE DIRECTIVES WILL LEAD THE APPLIANCE AND ITS SURROUNDING TO
OVERHEAT, AND POSSIBLE DAMAGE, SOILING,…
1.5.1 CONVECTIVE AIR INLET
It is compulsory to build an inlet of convective air at the base of the firebox. This inlet must have a
minimum nominal section of E cm2 (actual surface of air passage).
Even if the air entry comes through a wood niche, the actual surface of convective air passage
must imperatively be respected.
1.5.2 CONVECTIVE AIR OUTLET
One (or more) convective air outlet(s) of free minimum nominal section of S cm2 must be built to
evacuate the convective air. To be built as high as possible in relation to the suspended ceiling,
and at least 30 cm from the ceiling of the room.
CONVECTIVE AIR INLET
E
CONVECTIVE AIR OUTLET
S
ULYS 600 700 cm² MINI 800 cm² MINI
ULYS 900 700 cm² MINI 800 cm² MINI
ULYS 700 600 cm² MINI 700 cm² MINI
ULYS 1100 700 cm² MINI 800 cm² MINI
ULYS 800 700 cm² MINI 800 cm² MINI
ULYS XXL 700 cm² MINI 800 cm² MINI
IN THE CASE THE SECTIONS OF CONVECTIVE AIR OUTLETS ARE SUPERIOR, THE CONVECTIVE AIR
INLET MUST HAVE A MINIMUM SECTION 0.77 TIMES THE SECTION OF CONVECTIVE AIR OUTLET.