Fonda LEDDLES, Руководство пользователя, Страница: 18 / 36

18
Use of the cable with magnetic adapter for charging
the Leddles device
The following procedure must be performed whenever the device needs to be charged.
1 ) Make sure the magnetic adapter ( 1 ) is inserted into the glasses as in Fig. 2 (c). If not, follow the
instructions in the “ Preliminary operations - Inserting the magnetic adapter into the glasses
frame ” section.
2) Place the glasses on a flat surface, near to a power outlet, with the temples open and the magnetic
adapter (
1 ) facing upwards; bring the magnetic connector close to the magnetic adapter - Fig.3 (a) -
until they perfectly fit - Fig.3 (b).
If the other end of the cable is not connected to the charger, insert the USB-A connector (3) in the
appropriate slot on the charger. Link the charger to the power outlet. Make sure all the parts are
connected - Fig.3 (c).
3) Make sure that the glasses light source is turned off during the recharging operations.
It takes at least 3 hours for a full recharge of the batteries. If the batteries have been completely
discharged for long time, the full recharge can take over 4 hours.
With fully charged batteries, the LED lighting has an autonomy of about 2 hours and a half.