16
Preliminary operations – Inserting the magnetic adaptor into the
glasses frame
The following procedure must be performed only on the first charge operation and in the event that the
magnetic adapter (
1
) detaches from the glasses.
1
) Make sure the magnetic adapter (
1
) and the magnetic connector (2) are connected as in Fig.
1
(b)
2) Fully insert the magnetic adapter and the magnetic connector into the glasses, respecting the correct
direction for insertion (wider part of the adapter (
1
) towards the outside of the temple) Fig. 2 (a).
If you experience excessive resistance during insertion, stop the operation and check whether you have
respected the correct direction of the connector.
3) Disconnect the magnetic connector (2) from the magnetic adapter (
1
) without pulling it out.
Perform this operation by holding the cable by the body of the magnetic connector (2), slightly bending
the magnetic connector (2) towards the outer or inner part of the frame - Fig. 2 (b).
When the operation is completed, the magnetic adapter (
1
) must remain incorporated in the
glasses as in Fig. 2 (c).
In case the magnetic adapter too is extracted (
1
) repeat the preliminary operations from point
1
.
Содержание LEDDLES
Страница 1: ...1 User s manual...
Страница 17: ...17 Fig 2a Fig 2b Fig 2c Disconnect the magnetic connector without pulling...
Страница 36: ...36 www leddles com...