- 24 -
6
.
S
S
Y
Y
S
S
T
T
E
E
M
M
C
C
O
O
N
N
F
F
I
I
G
G
U
U
R
R
A
A
T
T
I
I
O
O
N
N
S
S
6.1 How to Set ID Codes
For the Alpha 600XJ series transmitter, except for the spare transmitter, there will have only one
default 24 bits ID code. Please do not change it as will to avoid any interference.
If two transmitters set with an identical ID code work for the same receiver,
please do not operate
two or more transmitters with the same ID code at the same time to avoid danger.
6.1.1
Set by the Alpha 600 programmer.
6.1.2 Set by JP1 and JP2 of encoder board with the dip-switch
The 24 bits of ID code are separated into three sections, for example: if ID code is 12 34 56
(
Hexadecimal)
1st section:
Example 12 in IDH. Encoder board JP2: 1-2-3 pin first shorted, then set the ID code
by the dip-switch.
2nd section:
Example 34 in IDM. Encoder board JP2: 2-3 pin first shorted, then set the ID code by
the dip-switch.
3rd section:
Example 56 in IDL. Encoder board JP1: 1-2 pin first shorted, then set the ID code by
the dip-switch.
IDL
Setting Steps: (When proceeding with the IDH & IDM setting, be sure to match the
corresponding jumper and PIN)
(1)
Rotate the transmitter power switch to OFF position.
(2)
Remove the transmitter shock-absorbing rubber.
(3)
Place the transmitter pushbutton side downward and unscrew the transmitter bottom casing.
(4)
Set the transmitter ID code with the dip-switch on the encoder board and put jumper on the 1
st
and
2
nd
pin of JP1.
(5)
Make sure the batteries are installed properly.
(6)
Rotate the transmitter power switch to ON position.
(7)
Green status LED ON for 0.1 sec, OFF for 0.1 sec, flash for 1 sec. (5 times)
(8)
Green status LED steady ON indicates the setting is completed. If the LED status light is changed to
red, the setting is failed. Please repeat the above setting steps until the setting is successful.
(9)
After setting is completed and successful, remove the jumper from the 1
st
and 2
nd
pin of JP1.
(10) Rotate transmitter power switch to OFF position.
Содержание Alpha 600XJ Series
