364
Other Useful Functions
1
m
Call time/cost
Reset total cost&dura.
Enter your Terminal Security Code
Do the following operations.
You can set the call cost limit for Total Calls and can
be notified when it is exceeded. If you set “Auto reset
setting” to “ON”, the call cost is reset at midnight on
the 1st of the month and “
” is deleted.
1
m
Call time/cost
Notice call cost
Enter your Terminal Security Code
ON or OFF
p
If you select “OFF”, the setting is completed.
Information
p
When Last Call Duration exceeds “19 hours 59 minutes
59 seconds”, or Total Calls Duration exceeds “199 hours
59 minutes 59 seconds”, “0 s” returns to re-count the time.
p
If you switch between the voice call and video-phone call
during a call, the call duration and call cost are counted
respectively for the calls. You are not charged while
“Changing” (see page 58) is displayed.
p
The duration/charge for PushTalk, i-mode
communication and packet communication are not
counted. For how to check the i-mode fee, refer to
“Mobile Phone User’s Guide [i-mode]” which is supplied
on your i-mode contract.
p
The charge for Chaku-moji is not counted.
p
The duration for ringing and calling is not counted as call
duration.
p
If you turn off the power or remove the UIM, Last Call Duration
is reset to “0 s”; and Last Call Cost is reset to “¥
__
”.
+
m
-
6
-
0
Reset Total Cost&Duration
Resetting Total Duration/Total Cost
<
>
Item
Operation/Explanation
Reset total
duration
You can reset Last Call Duration and Total
Calls Duration to “0 s”.
YES
Reset total
cost
You can reset Last Call Cost and Total
Calls to “¥0”.
YES
Enter the PIN2 code.
p
See page 155 for PIN2 code.
Notice Call Cost
Setting Call Cost Limit
Setting at purchase
Notice call cost: OFF
Max cost: ¥0 (when “Notice call cost” is
set to “ON”)
Method to alert: Icon (when “Notice call
cost” is set to “ON”)
Auto reset setting: OFF (when “Notice
call cost” is set to “ON”)
<
>
2
Enter a max cost.
You can set from ¥10 through ¥100,000 in unit of ¥10.
3
Select a method to alert
ON or OFF
Enter the PIN2 code.
p
See page 155 for PIN2 code.
You can clear “
” displayed by Notice Call Cost.
1
m
Call time/cost
CLR max cost icon
Enter your Terminal Security Code.
You can display Calculator to make the four rules of
calculation (
+
,
−
,
×
,
÷
). You can display up to 10
digits.
1
m
Calculator
Follow the
operation below to make a calculation.
■
When Total Calls has exceeded the max cost
“
” appears. When “Icon + alarm” is set as a notice
method and the Stand-by display returns, the message to
the effect that the call cost has exceeded the maximum
cost is displayed, and a warning tone sounds from the
speakers.
Clear Max Cost Icon
Information
p
“
” is cleared also by executing Reset Total Cost,
Reset Settings, or Initialize.
p
To be re-notified of the set limit after the maximum cost
is exceeded, reset Total Calls.
+
m
-
8
-
5
Calculator
Using Calculator
<
>
+
V
o
+
+
Z
o
×
+
O
o
=
+
C
o
−
+
X
o
÷
+
l
Decimal
point
-
r
C (Clear)
Clears the numeral you have entered last.
AC (All clear)
Clears all the calculations you entered.
Содержание P703i
