268
i-
α
ppli
■
When “
” appears on the Trace Information or
Security Error History display
You can copy information by pressing
i
(
) and
selecting “Copy info”. To delete information, select “Delete
info”, and select “YES”.
Information
p
To start up i-
α
ppli DX, set the data and time by “Set time”
beforehand.
p
When a software program is running, melodies are
played back at the volume set for “Phone” of “Ring
volume”. However, melodies are not played back during
a call.
p
You may need to set the communication setting while a
software program is running.
p
When communicating frequency is extremely high in a
certain period of time while i-
α
ppli is running, the
confirmation display appears asking whether to continue
communicating.
p
With some software programs, you can use the Web To
function and the Phone To/AV Phone To function from
i-
α
ppli. However, you cannot use them while the software
program is running as the i-
α
ppli Stand-by display.
p
If you start a camera from i-
α
ppli, the shot images are not
saved with ordinary images, but are saved as part of
i-
α
ppli for its usage.
p
If you start a camera from i-
α
ppli, you can specify the
image size or image quality for some i-
α
ppli programs.
p
You can scan QR codes and JAN codes from i-
α
ppli
using the camera. The scanned data is saved and used
by the software program.
p
Images
※
that are used by i-
α
ppli and data you have
entered might be sent over the Internet to the server
automatically.
※
i-
α
ppli uses the following types of images:
・
Images taken by the camera after it is started from a
camera-linked i-
α
ppli
・
Images obtained by the infrared exchange function of
i-
α
ppli
・
Images downloaded from sites or Internet web pages
・
Images obtained from Data Box by i-
α
ppli
p
i-
α
ppli mail running under mail-linked i-
α
ppli might not be
displayed correctly.
Information
p
When the memory space for the Trace information
becomes full, the information is overwritten from the
oldest one.
p
To creators of i-
α
ppli
If you encounter an error while creating a software
program, the Trace Information display might help
identify the problem.
For how to check the Trace Information, see “
■
When
a software program malfunctions” on
page 267.
p
Some i-
α
ppli programs save the various information
running under i-
α
ppli when you finish it. However, the
information might not be saved if the low battery alarm
sounds or the battery pack is removed while i-
α
ppli is
running. If the battery level indicates “
”, either press
h
or end i-
α
ppli in accordance with the operation of
each software program.
p
You can save the data files of some software programs
to the microSD memory card, but you might not be able
to use them for another function. You can check
“
i
α
ppli(microSD)” for the software programs that use
the microSD memory card.
p
Some IPs (Information Providers) may access the
software program stored in your mobile phone and have
it directly suspended, depending on the software
program. In that case, you will not be able to start or
update the software program, or use it for the Stand-by
display. You can delete it or to display the software
information. To resume running the software program,
you need to receive the communication to cancel the
software suspension. Contact the IP (Information
Provider) to inquire about that.
p
Some IPs (Information Providers) might send data to the
software program stored in your mobile phone
depending on the software program.
p
When the IP (Information Provider) requests to halt or
re-open the software program or sends data to it, the
mobile phone communicates and “
” is displayed. In
this case, you are not charged a communication fee.
Function Menu of the Software List/IC Card List
Information
Function menu
Operation/Explanation
Set
i
α
ppli To
You can set whether to permit the i-
α
ppli program
to start from links on sites or mail. You can also
set whether to start the i-
α
ppli program when you
place the FOMA phone over an IC card
compatible scanning device (reader/writer). You
can set this for each software program.
Put a check mark for items to be set
l
(
)
p
Some items might not be set depending
on the software program.
Auto start
time
You can set the date and time for Auto
Start. (See page 275)
Software setting
(Stand-by set)
You can set the software program as the
i-
α
ppli Stand-by display. (See page 276)
Software
setting
(Network set)
You can set whether to communicate while
i-
α
ppli is running.
Network set
ON, OFF or Check every
start
l
(
)
p
If you select “Check every start”, the
confirmation display appears each time
you start it.
Содержание P703i
