Follett Tempo UCD100A30-CF, Руководство по эксплуатации и обслуживанию

Страница: 23 / 44

Tempo Undercounter Ice Machine Bin 23
Evaporator Assembly
1. Remove and inspect main housing O-ring seal. Replace if
damaged in any way.
2. Clean O-ring groove. Lubricate O-ring with Petrol-gel and reinstall.
3. Use cardboard disc to press new mating ring into main housing
(Fig. 32.1).
4. Lube the shaft with liquid soap in the area shown (Fig. 32.2) and
slip on seal and spring
(Fig. 32.3).
Note: Do not touch the sealing surfaces with bare hands. Contact with
bare skin will cause premature seal failure.
5. Install auger (Fig. 32.4).
Fig. 32
Cardboard
disc
Do NOT touch!
1
3
4
2
6. Install main housing:
§
Slide main housing onto auger shaft (Fig. 33.1).
§ Install three M6x25 allen screws
(Fig. 33.2) and vent tube clip.
§ Connect vent line to T fitting
(Fig. 33.3).
Fig. 33
1
2
3
7. Install compression nozzle:
§ Remove and inspect compression nozzle O-ring seal. Replace if
damaged in any way.
§ Clean O-ring groove. Lubricate O-ring with Petrol-gel and reinstall.
§
Install compression nozzle (Fig. 34.1).
§
Install compression nozzle retainer (Fig. 34.2).
§ Install M6 socket head allen screw
(Fig. 34.3).
Fig. 34
2
1
3