COUNTER TOP DISPENSER WITH LEGS
3/8" FPT water inlet
3/4" FPT drain
power cord
Fig. 3 – Rear exiting utilities
(countertop units)
3/4" FPT drain
3/8" OD push-in
water inlet
Remove poly tubing and
fitting for water inlet
bottom
panel
screw
leg
Do NOT tilt unit farther than 30
˚
off
vertical plane.
Countertop dispensers that sit on legs
(not bolted to counter) can be
inadvertently moved. Care should be
taken when operating and cleaning to
avoid accidents.
!
Fig. 2 – Bottom exiting utilities
(countertop units)
Fig. 4 – bottom panel assembly
1. Carefully tip dispenser back to expose underside
and block up in place.
2. Screw legs (shipped taped to drain pan of
dispenser) into dispenser bottom, taking care to
seat legs securely against underside of dispenser.
3. Attach bottom panel and hardware to bottom of
dispenser with supplied screws (Fig. 4).
4. Position unit in desired location and adjust bullets
on legs to level in both directions.
5. Make final connections.
Installing countertop dispensers
with legs accessory
16" (407mm)
11.7"
(298mm)
8.1"
(206mm)
1.5"
(39mm)
.9" (23mm)
6
Move pipe plug
to back of unit
