Symphony Series Pressurized Water Sanitizing Kit - Single Filter 5
17. Unplug unit and allow sanitizer to remain in
water lines and water reservoir for at least
5 minutes.
18. Turn OFF water supply.
19. Depress red pressure release button to
relieve pressure.
20. Remove pre-filter bowl (Fig. 7.1), discard
sanitizer
(Fig. 7.2), rinse with potable water,
and re-install
(Fig. 7.3).
Fig. 7
1
2
3
21. Turn ON water supply.
22. Plug in dispenser and dispense water into
a container for 30 seconds
(Fig. 8) to flush
sanitizer from the dispenser water lines.
23. Discard water collected in container.
24. Drain water for 30 seconds from the
water reservoir by releasing evaporator
drain tube from float reservoir bracket,
removing plug from drain tube and releasing
(unclamping) pinch clamp (if equipped).
25. Plug drain hose, replace drain tube in
reservoir bracket.
26. Immediately perform Cleaning/Sanitizing
procedure according to instructions shipped
with dispenser.
Fig. 8
30 sec
