12
self-contained
Cornelius • RIDE Technology
Ground
❹
➋
➊
16"
(61 cm)
➌
➎
➏
➐
• Mount the electrical box to the side of the dispenser
➊
to establish a ground connection.
Note: If a 4 x 4 box is mounted to a non-grounded surface, connect ground wire at an
appropriate ground.
• Connect the bin signal cord to the plug on the electrical box.
➋
• Insert 16" (61 cm) of the long bin signal cable
➌
into the hole in the back of the docking station
➍
and secure in place with strain relief provided.
• After sliding the ice machine module into the docking station, disconnect one wire from shuttle
switch and replace with wire from adapter plug.
➎
• Connect wire removed from shuttle switch to male connector on adapter plug wire.
➏
• Complete normal installation procedure for the ice machine using the installation manual that
shipped with the ice machine.
• Connect adapter plug into bin signal plug.
➐
2.1
Bin Signal Installation
6.1
Bin signal
Install the bin signal.
6
