Follett Horizon Elite H C1010ABT Series, Руководство по установке

Страница: 10 / 16

10
Horizon 710/1010/1410
BIN • TOP-MOUNT
5.
Internal Connections
Air-cooled ice machines – follow steps 5.1 through 5.5.
Water-cooled ice machines – follow steps 5.6 through 5.12.
5.1
Ice transport tube
5.2
Water solenoid, shut-off valve, and
potable water line options
➊
➋
5.2.1
If water solenoid is already mounted to
evaporator:
1. Insert potable water line into shut-off valve.
5.2.2
If this is an undercounter installation:
1. Mount water solenoid atop evaporator
and locate the shut-off valve inside the
machine. Insert potable water line into
shut-off valve.
5.2.3
If water solenoid is not mounted and
machine will not be installed undercounter:
1. Mount water solenoid to inside rear (upper
right corner) of docking assembly using
one screw.
2. Insert potable water line into shut-off
valve - locate the shut-off valve outside the
machine.
3. Insert outgoing line from shut-off valve into
push-in connection of water solenoid.
§
Slide ice machine into docking assembly
ensuring that drain tube is fully seated on
barbed drain fitting ➊
.
§ Insert ice transport tube all the way into coupling
and tighten nut firmly
➋
.
5.3
Power cord
5.4
Power cord
§ Remove twist tie.
§ Carefully pass plug through opening and plug into
wall outlet.
§
For H_E units, install a suitable plug.
§ Position plate into opening and secure with
supplied screw.
WARNING!
Plate must be securely installed to ensure proper
equipment ground.