Follett Horizon Elite Chewblet 1010 Series, Руководство по установке

Страница: 6 / 16

6
remote condensing
DROP-IN • RIDE Technology
12"
(304,8mm)
min.
4"
(101,6mm)
➌
➍
➓
➑
➋
➏
➎
➊
➐
➐
➒
Hot Water
160 F (71 C)
Prepare the dispenser.
3
Dispenser preparation
• Determine best route for ice transport tube run. Note: 12" (304,8 mm) clearance is required.
• Drill 1 3/4" (44,5 mm) hole through either side of dispenser ➊
• Install gasket ➋ onto bulkhead fitting ➌
• Attach bulkhead fitting with flat up ➍ and tighten bulkhead nut ➎
• Position and secure nut locking plate ➏ with supplied screws
• Verify installation of O-ring on stainless steel ice transport tube coupling
➐
• Insert stainless steel ice transport tube coupling ➐ into bulkhead fitting and secure with coupling
cap ➑
• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers
➒
before making connection to ease assembly
• Attach ice transport tube to coupling with supplied hose clamp ➓
2.1
Dispenser preparation
3.1