background image

HCC1010A/W, HCD1010A/W, HCC1410A/W, HCD1410A/W 

3

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding 
after-the-sale support. To ensure that this equipment delivers the same degree of service, we ask that you review 
the installation manual (provided as a separate document) before beginning to install the unit. Our instructions are 
designed to help you achieve a trouble-free installation. Should you have any questions or require technical help at 
any time, please call our technical service group at (877) 612-5086 or +1 (610) 252-7301.

Before you begin

After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If 
damage is found, notify the shipper immediately and contact Follett Corporation so that we can help in the filing of 
a claim, if necessary.
Check your paperwork to determine which model you have. Follett model numbers are designed to provide 
information about the type and capacity of Follett equipment. Following is an explanation of the different model 
numbers in the series.

 

CAUTION

•  Warranty does not cover exterior or outside installations.
•  Moving parts. Do not operate with front cover removed.
•  Hot parts. Do not operate with cover removed.
•  To reduce risk of shock, disconnect power before servicing.
•  Drain line must not be vented.
•  Water supply must have particle filtration.
•  Most ice machine cleaners contain citric or phosphoric acid, which can cause skin irritation. Read caution label 

on product and follow instructions carefully.

•  Ice is slippery. Maintain counters and floors around dispenser in a clean and ice-free condition.
•  Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.

Configuration

Application

S RIDE™

(RIDE remote

ice delivery
equipment)

T Top-mount 

 425  up to

425 lbs
(193 kg)

 710  up to

675 lbs
(306 kg)

1010  up to

1061 lbs
(482 kg)

1410  up to

1466 lbs
(665 kg)

1810  up to

1790 lbs
(812 kg)

2110  up to

2039 lbs
(925 kg)

V Vision™
H Harmony™
B  Ice storage bin
J Drop-in
M  Ice Manager 

diverter valve 
system

P  Cornelius Profile 

PR150

Condenser

Series

Voltage

Icemaker

C 208-230/60/1 (icemaking head)

Self-contained only.

D  115/60/1 (icemaking head)

Self-contained and remote. If remote 
unit, high side is 208-230/60/1.

E 230/50/1 (icemaking head)

Self-contained only.

F  115/60/1 (icemaking head)

Remote only. High side is 
208-230/60/3.

MC Maestro™

Chewblet

®

 

(425 Series)

HC Horizon

Chewblet 
(710, 1010, 
1410, 1810, 
2110 Series)

HM Horizon

Micro Chewblet

HC

1810

D

S

V

A

A  Air-cooled, self-contained
W  Water-cooled, self-contained
R  Air-cooled, remote condensing unit
N  Air-cooled, no condensing unit for 

connection to parallel rack system

Chewblet

®

 Ice Machine Model Number Configurations

Содержание HCC1010A













































Отзывы: