Follett E7CI100A, Инструкция по установке, эксплуатации и обслуживанию

Страница: 11 / 40

Dispenser and Ice machine E7CI100A/E7FS100A 11
Maintenance/Cleaning Mode –––––––––––––––––––––––––––––––––––––––
Cleaning Mode (Dispensing Disabled) - Use when cleaning
surface
Entering Cleaning Mode disables the User Interface and allows you to
clean the outside of the dispenser without accidentally dispensing water
or ice.
1. To enter Cleaning Mode, press and immediately release the
maintenance/clean switch
(Fig. 10.1) so that only "FRESH
FILTERED ICE AND WATER" displays in the user interface
(Fig. 10.2) .
2. To exit Cleaning Mode, press and immediately release the
maintenance/clean switch so that the ice and water icons also
display in the user interface.
Maintenance Mode (All Operations Disabled) - Use when cleaning
ice machine
Entering Maintenance Mode disables all operations and allows you to
safely clean and/or sanitize the ice machine and dispenser.
1. To enter Maintenance Mode, press and hold the maintenance/
clean switch
(Fig. 10.3) until displays in the user interface
(Fig. 10.4) .
2. To exit Maintenance Mode, press and hold the maintenance/
clean switch until
no longer displays in the user interface.
Note: Entering and exiting Maintenance Mode will reset the six-month
periodic maintenance reminder.
Fig. 10
4
3
2
1
Accessing Internal Components ––––––––––––––––––––––––––––––––––––
CAUTION!
Except for routine cleaning and sanitizing, only qualifi ed
technicians should attempt to service or maintain this
equipment.
1. Press and hold the maintenance/clean switch (Fig. 10.1) until
displays in the user interface (Fig. 10.2) .
2. Remove (unscrew) chrome ice dispenser chute (Fig. 11.1) .
3. Remove the drip tray (Fig. 11.2) .
4. Remove the two screws (Fig. 11.3) on the front panel (behind
the drip tray).
5. Remove and set aside the front panel (Fig. 11.4) - do not
disengage the plug on the back of the User Interface or the
tubing at the water dispenser chute (if so equipped).
Fig. 11
1
2
3
4