Follett E01087, Инструкция по установке, эксплуатации и обслуживанию

Страница: 24 / 36

24 Undercounter Dispenser and Ice machine 7UC100A/7UD100A
Service
(continued)
––––––––––––––––––––––––––––––––––––––––––––––––––––
User Interface Display Identification
Operation Display
Condition
Procedure
Normal
operation
—
Cleaning
Mode
Press and release maintenance/clean switch to
clean the user interface without dispensing ice
or water (see Maintenance/Cleaning Mode on
page 9 ).
Drip tray full Empty drip tray .
PM
Six-month
periodic
maintenance
required
Follow Maintenance Mode procedure (below)
and also see
Cleaning and Sanitizing on page
11
.
Maintenance
Mode
Enter Maintenance Mode by pressing
maintenance/clean switch until displays .
Complete the cleaning and sanitizing procedure
shown on page 11 and change the filter, if so
equipped . Exit Maintenance Mode by pressing
and holding maintenance/clean switch until
no longer displays .
Service - 8000
hr bushing
check
Call Follett Technical Service Group at (877)
612-5086 or +1 (610) 252-7301 . The flashing
wrench indicates that the 8000 hr bushing check
is required .
High amps Contact Follett technical service group at (877)
612-5086 or +1 (610) 252-7301 .
Note: For dispensers after serial number
D45191, the phone and wrench will not be
illuminated .
Internal leak in
dispenser
Locate leak and repair - Press reset on control
board . Contact Follett if ice machine is leaking .
Sleep mode Press either dispense button to return to normal
operation .