Follett 7CI100A, Инструкция по установке, эксплуатации и обслуживанию

Страница: 9 / 48

7CI100A/7FS100A, 15CI100A/15FS100A 9
Optional Leg Accessory Installation
CAUTION!
Use caution when tipping the dispenser during leg installation. Do
not lay unit on back or side. DO NOT EXCEED 30° angle. Tipping
more than 30° can result in compressor malfunction.
1. If installing optional 4" Leg Accessory (item# 00956300), place a
5" (12.7 cm) spacer underneath the dispenser to ease installation.
2. Remove four plastic, thread-protecting plugs from bottom of
dispenser.
3. Screw each leg into chassis (Fig. 3).
Fig. 3
Freestanding Installation
Installation instructions for countertop model may be found on Countertop
Installation on page 8 .
1. A clearance of at least 3" (7.62 cm) is required behind and on
each side of the dispenser for electrical connection and ventilation
(Fig. 4).
2. Rough-in the electrical service and water line.
§
Electrical: 115 V, single phase, 15A receptacle required. The dispenser
has an integral 8 ft (2.4 m) cord and plug.
§ Water: supply line (with shut-off valve) connects to the dispenser's
1/4" MPT or John Guest push-in fitting inlet.
NOTICE!
If installing optional Leg Accessory, complete those steps before
proceeding. See
page 11
for Leg Accessory instructions.
Fig. 4
spacer
5" (12.7 cm)
min.
freestanding models
minimum 3" (7.62 cm)
clearance required