Reversing the Door Swing - Optional
CAUTION!
When reinstalling hinge screws, 242 blue Loctite* MUST be applied to screws. Torque screws to 25 in-lbs.
1.
Use fl at screwdriver to carefully remove hinge covers. Care
should be taken to avoid scratching chrome cover or refrigerator
body
(Fig. 3.1)
.
2.
Support door and remove screws attaching hinge to refrigerator
cabinet
(Fig. 3.2)
.
3.
Remove plugs from opposite side of unit and cover hinge screw
holes.
4.
Remove screws holding lock strike-bracket at "bottom" inside of
door
(Fig. 4.1).
5.
Remove plugs from inside of door "top" and install bracket.
6.
Plug "bottom" holes with retained plugs and install lock strike-
bracket to "top" inside of door
(Fig. 4.2)
.
7.
Reverse door 180° so that lock strike-bracket is on the bottom
inside of door
(Fig. 4.3)
.
8.
Apply 242 blue Loctite* to hinge screws, reinstall screws
(torqued to 25 in-lbs)
(Fig. 5.1)
and replace hinge covers
(Fig. 5.2)
.
Fig. 3
1
2
Fig. 4
1
2
3
*Loctite is a registered trademark of Henkel Corporation in the United States and other countries.
Fig. 5
1
2
6
REF1/REF2 Compact Refrigerators
