background image

Installation and Service Videos:

www.follettice.com/servicevideolibrary

01033729R05

801 Church Lane • Easton, PA 18040, USA
Toll free (877) 612-5086 • +1 (610) 252-7301
www.follettice.com

Symphony Plus

 110 Series  

Ice and Water Dispensers

110CT425A/W, 110FB425A/W

Installation Guide

Please visit 

https://www.follettice.com/technicaldocuments

  

for the Operation and Service manual for your unit.

110CT425A/W

110CR425A/W

110FB425A/W

110CT425A/W

110CR425A/W

110FB425A/W

Welcome to Follett

Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and outstanding 

after-the-sale support. To ensure that this equipment delivers that same degree of service, review this guide carefully 

before you begin your installation. 
Should you have need technical help, please call our Technical Service group at (877) 612-5086 or (610) 252-7301.
Please have your model number, serial number and complete and detailed explanation of the problem when 

contacting Technical Service.

Getting Started

After uncrating and removing all packing material. Inspect the equipment for concealed shipping damage. All freight 

is to be inspected upon delivery. If visible signs of damage exist, please refuse delivery or sign your delivery receipt 

"damaged." Follett Customer Service must be notified within 48 hours. Wherever possible, please include detailed 

photos of the damage with the original packaging so that we may start the freight claim process.

Содержание 110CT425A

















Отзывы: