Foerster CIRCOGRAPH DS, Руководство по эксплуатации

Страница: 10 / 67

1.3 Use as intended SAFETY
2
6.452
1.3 Use as intended
The sensor system is suitable only for non-destructive testing of round
material .
Diameter range: see 2.4 Technical Data
Smaller diameters and larger diameters may not be admitted into the
sensor system under any circumstances.
Material with a cross-section which is anything other than round may not
be admitted into the sensor system under any circumstances.
The sensor system may be operated only in conjunction with a suitable
conveying mechanism and a lifting table.
On no account may you convert or modify the sensor system arbitrarily,
for reasons relating to safety.
DANGER !
Masses rotating at high speed pose a serious danger to your life if the
machine is operated incorrectly.
Never touch the rotating sensor components.
NOTE !
The information on operation, servicing and maintenance prescribed in
these operating instructions must be followed strictly.
1.4 Dangers posed by accessories
Transport mechanisms, lifting table and external control equipment must
not render the protective safety devices of the sensor system inoperable.
1.5 Emissions
See 2.6 Environmental conditions.