Foerster 6.453, Руководство по эксплуатации

Страница: 49 / 67

SENSORSYSTEM Ro 130
OPERATION
4.3 Changing nominal diameter
6.453 – 01/2006
4-15
4.3.6 Setting the roller guides
Set the roller guide coarsely to the nominal diameter in accordance
with the scale (in the case of new track rollers, the clear diameter of the
track rollers corresponds exactly to the scale setting)
Swivel in the roller guide, turn the locking bolt in cw direction up to the
stop
If required, set track roller approx. 0.4 to 1.0 mm closer in diameter
(rotating by 40°, max 100° at the hand wheel)
NOTE!
A lower pretension of the track rollers protect both the test material and
track rollers. A higher pretension improves the quality of guidance.
4.3.7 Positioning the transmitter system in the testing line
Move the lifting table back into the testing line and lock it
Adjust the table to the height of the testing axis and lock it
NOTE!
The test piece must run centrically through the transmitter system!
Fig. 4.10 Setting the roller guides