Foerster 6.453, Руководство по эксплуатации

Страница: 47 / 67

SENSORSYSTEM Ro 130
OPERATION
4.3 Changing nominal diameter
6.453 – 01/2006
4-13
NOTE !
Use only nozzle pairs with the same nominal diameter!
Entry nozzle 10 - 30 mm
Fit the entry nozzle (12) into the inserted adapter (13) by turning it
The clamping ring (10) remains closed
Fit the clamping ring entry (11.2) onto the adapter ring (13) and clamp it
Tighten three allen screws M 6x22 DIN 912 (A) with 6 Nm
Entry nozzle 31 - 68 mm
Fit the entry nozzle (9) into the adapter (7) by turning it
the clamping ring (10) is closed
Fit clamping ring entry (11.1) onto adapter ring (7)
Tighten three allen screws M 6x10 DIN 912 (A) with 6 Nm
Entry nozzle 69 - 135 mm
Fit the entry nozzle (9) into the housing flange (6) by turning it
Fit clamping ring entry (10)
Tighten three allen screws M 8x20 DIN 912 (B) with 12 Nm
Exit nozzle 10 - 30 mm
Note !
The outer sleeve (16.2) is already in place
Fit the exit nozzle (17) onto the dovetail guide of the inner sleeve(16.1)
Insert the inner sleeve(16.1) with exit nozzle (17) fitted into the outer
sleeve (16.2)
Tighten three allen screws M 6x25 DIN 912 (E) with 6 Nm
E
xit
nozzle 31 - 68 mm
Fit the exit nozzle (15) into the adapter by turning it
Fit the clamping ring exit (14.2)
Tighten four allen screws M 6x22 DIN 912 (GE) with 6 Nm