background image

5

OVERVIEW

Introduction

Thank you for purchasing this Scarlett 2i4, one of the family of Focusrite professional computer audio 

interfaces incorporating high quality Focusrite analogue pre-amplifiers. You now have a simple and 

compact solution for routing high quality audio to and from your computer.

This  User  Guide  provides  a  detailed  explanation  of  the  hardware  to  help  you  achieve  a  thorough 

understanding of the product’s operational features. We recommend that both users who are new 

to computer recording, as well as more experienced users, take the time to read through the User 

Guide  so  that  you  are  fully  aware  of  all  the  possibilities  that  the  Scarlett  2i4  and  accompanying 

software has to offer. If the main User Guide sections do not provide the information you need, be 

sure to consult 

http://www.focusrite.com/answerbase

, which contains a comprehensive collection of 

common technical support queries.

Features

The  Scarlett  2i4  hardware  interface  provides  the  means  for  connecting  microphones,  musical 

instruments or line level audio signals to a computer running Mac OS or Windows. The signals at the 

physical inputs can be routed to your audio recording software / digital audio workstation (referred 

to throughout this user guide as the “DAW”) at up to 24-bit, 96 kHz resolution; similarly, the DAW’s 

monitor or recorded output will appear at the unit’s physical outputs.

Audio sources – mics, instruments, etc. – connected to the physical inputs can be recorded in the DAW 

and then routed from your DAW to the physical outputs. The 2i4 is equipped with four audio output 

channels, which can be connected to an amplifier and speakers, powered monitors, headphones, 

DJ or other type of mixer, or any other analogue audio equipment that you wish to use. Although 

all inputs and outputs on the Scarlett 2i4 are routed directly to and from your DAW for recording 

and playback, you can configure the routing within your DAW in order to meet your needs. A Direct 

Monitoring feature lets you hear what you are playing without the effects of computer latency. The 

2i4 also acts as a convenient MIDI interface between your computer and other MIDI equipment.

For DJs, the two pairs of outputs make it simple to interface the stereo output from a laptop running 

DJ software to two channels of a DJ mixer.

Box Contents

Along with your Scarlett 2i4 you should have:

 

• Software Activation card, with codes for accessing the following on-line resources:

 

 

- 2i4 USB Drivers for Mac and Windows

 

 

- Scarlett Plug-in Suite for Mac and Windows

 

 

- Ableton Live Lite

 

 

- LoopMasters sample library

 

 

- Novation Bass station

 

 

- Multi-language User Guides

 

• USB cable

 

• 8-page hard-copy “Getting Started Guide”

Содержание Scarlett 2i4



















Отзывы: