Focusrite RedNet 5, Руководство пользователя

Страница: 7 / 24

7
INSTALLATION GUIDE
Unit connections and features
RedNet 5 - Front Panel
1 3
4
5 8
6 2
1. AC Power switch
2. INPUTS – inputs to the network (i.e., outputs from Pro Tools|HD). Eight tricolour LEDs
indicating the signal level in four consecutively-numbered channels; the colour indicates the
highest signal in the four. Individual LEDs indicating signal level at each analogue input:
• Green: signal present
• Amber: -6 dBFS
• Red: 0 dBFS
3. OUTPUTS – outputs from the network (i.e., inputs to Pro Tools|HD). Eight LEDs indicating the
signal level in the output channels; these function in the same manner as the input channel
LEDs [2]
4. NETWORK status flags – two green LEDs confirming network status:
• CONNECTED – illuminates when the unit is connected to an active Ethernet network
• LOCKED – illuminates when a valid sync is received via the network or an external source
5. SAMPLE RATE indication – five yellow LEDs; only one of these (44.1 kHz, 48 kHz, 88.2 kHz,
96 kHz, 192 kHz) will be lit at a time, to confirm the sample rate that the system is running at.
6. MODE indicators – two yellow LEDs confirming the Pro Tools interface mode:
• PRIMARY – the normal operating mode, in which RedNet 5 appears to Pro Tools as two
external 16 channel interfaces.
• EXPANSION – this mode should be selected from RedNet Control when the rear Panel
EXPANSION port is in use. RedNet 5 will now appear to Pro Tools as a single 16 channel
interface. This mode should also be used when RedNet 5 is connected to the expansion
port of a 16 channel Pro Tools|HD device.
7. POWER LED