7
20. LINE OUTPUTS 1 to 8 – eight balanced analogue line outputs on a 25-pin female D-sub
connector. This connector is always active, and normally carries the outputs of Channels 1 to
8, enabling the OctoPre to be used as a stand-alone 8-channel analogue mic pre. In
ADAT > LINE mode, the connector carries the signals applied at the OPTICAL IN ports [19].
The pinout of the connector follows the “Tascam” standard for 8-channel analogue interfaces:
Pin Function
Pin Function
1
Output 8 ‘hot’ (+)
14
Output 8 ‘cold’ (-)
2
Output 8 Gnd
15
Output 7 ‘hot’ (+)
3
Output 7 ‘cold’ (-)
16
Output 7 Gnd
4
Output 6 ‘hot’ (+)
17
Output 6 ‘cold’ (-)
5
Output 6 Gnd
18
Output 5 ‘hot’ (+)
6
Output 5 ‘cold’ (-)
19
Output 5 Gnd
7
Output 4 ‘hot’ (+)
20
Output 4 ‘cold’ (-)
8
Output 4 Gnd
21
Output 3 ‘hot’ (+)
9
Output 3 ‘cold’ (-)
22
Output 3 Gnd
10
Output 2 ‘hot’ (+)
23
Output 2 ‘cold’ (-)
11
Output 2 Gnd
24
Output 1 ‘hot’ (+)
12
Output 1 ‘cold’ (-)
25
Output 1 Gnd
13
n/c
21. WORD CLOCK OUTPUT – a BNC connector carrying the OctoPre’s word clock; this
may be used to synchronise other digital audio equipment.
22. WORD CLOCK IN – a BNC connector for the connection of an external word clock signal;
select by setting SYNC to W/CLOCK. Use this input if you have a Leader reference clock which
provides synchronisation for all the digital audio devices in your studio.
23. AC mains – standard IEC socket. The OctoPre is fitted with a “Universal” power
supply, and will run from any AC mains voltage from 100 to 240 V, at 50 or 60 Hz.
Содержание Clarett+ OctoPre
Страница 1: ...User Guide focusrite com Version 2 0...
