13
EXAMPLE SETUPS
1 . OCTOPRE WITH AUDIO INTERFACE: OCTOPRE AS CLOCK LEADER
Clock set to ADAT using Focusrite Control
AC ONLY 100-240V~ 50/60Hz 30W
WORD CLOCK
IN
OUT
LINE OUTPUTS
8
7
6
5
4
3
MIC/LINE INPUTS
CET APPAREIL DOIT ETRE MIS A LA TERRE PAR LE CORDON D’ALIMENTATION
THIS EQUIPMENT MUST BE EARTHED BY THE POWER CORD
W
ARNING /
A
VE
RTISSEMENT
IN
OUT
ADAT
INSERT 8
INSERT 7
INSERT 6
INSERT 5
INSERT 4
INSERT 3
192
3-4
1-2
96
5-8
1-4
48
1-8
2
1
INSERT 1/2
TIP = SEND RING = RETURN
R
CET APPAREIL DOIT ETRE MIS A LA TERRE PAR LE CORDON D
’
ALIMENTATION
THIS EQUIPMENT MUST BE EARTHED BY THE POWER CORD
1
2
3
4
5
6
7
8
9
10
WARNING AVERTISSEMENT
MONITOR
OPTICAL
OctoPre
Clarett 8+Pre
Here the OPTICAL OUT on the OctoPre is connected to OPTICAL IN on a Focusrite
8Pre audio interface with a single optical cable. Both units are running at 44.1 kHz sample rate.
The OctoPre’s clock source is set to INTERNAL, and the 8Pre is synchronised to it because its clock
source is set to ADAT (via Focusrite Control).
This setup would, for example, enable up to 16 mic or line sources to be recorded in a DAW
simultaneously, and would be ideal for recording a live band.
2 . OCTOPRE WITH AUDIO INTERFACE: AUDIO INTERFACE AS A CLOCK
LEADER
Clock set to W/Clock via the front panel
Clock set to Internal via Focusrite Control
OctoPre
8Pre
Here OPTICAL OUT on the OctoPre is connected to OPTICAL IN on a Focusrite
8Pre audio interface with a single optical cable. Both units are running at 44.1kHz sample rate.
The OctoPre’s clock source is set to W/CLOCK, and its WORD CLOCK IN input is connected to
WORD CLOCK OUT on the 8Pre with a BNC cable. The 8Pre’s clock source is set
to INTERNAL (via Focusrite Control), making it the sync leader. It would also be appropriate for any
other audio interface which has an ADAT input and a word clock output.
Содержание Clarett+ OctoPre
Страница 1: ...User Guide focusrite com Version 2 0...
