10
Connecting your 2Pre
The 2Pre has a USB-C™ port (on the rear panel). Once the software installation is complete,
connect the 2Pre to your computer using one of the supplied USB-C cables.
The 2Pre can be powered either with the supplied AC adaptor (PSU), or via the USB
connection, provided your computer has a 15 W Type-C™ port. See
to check whether your computer has a port of this type.
Turn the unit on with the power switch.
Computer audio setup
When you connect your 2Pre to your computer for the first time, you will need to select it as
the audio input/output device.
• MacOS: selection is made in
System Preferences
>
Sound
: select the Focusrite device on
both the
Input
and
Output
pages.
• Windows: selection is made in
Control Panel
>
Sound
: right-click on the Focusrite device
and select
Set as Default Device
in both
Recording
and
Playback
tabs.
If you have any problems, full details of how to select the 2Pre as the audio device can be
found at
focusrite.com/get-started/ClarettPlus-2Pre
After the first connection, your OS should automatically select the 2Pre as the default audio
device.
Audio Setup in your DAW
After installing the drivers and connecting the hardware, you can start using the 2Pre with
your DAW.
Please note - your DAW may not automatically select the 2Pre as its default I/O device. In this
case, you must manually select the driver on your DAW’s
Audio Setup
* page, and select
2Pre
(Mac) or
Focusrite USB ASIO
(Windows). Please refer to your DAW’s documentation or Help
files if you are unsure where to select the 2Pre as your audio device.
* Typical name – page names may vary with DAW
Содержание Clarett 2Pre
Страница 1: ...User Guide focusrite com Version 2...
