Focusrite Clarett 2Pre USB, Руководство пользователя

Страница: 9 / 20

9
Rear Panel
2 5 4
1 3 6 7
1. LINE OUTPUTS 1 to 4 – four balanced analogue line outputs on ¼” jack sockets; use TRS jacks
for a balanced connection or TS jacks for unbalanced. Line Outputs 1 and 2 will generally be
used for driving the main L and R speakers of your monitoring system, while Outputs 3 and 4
can be used for connecting additional line level equipment (e.g., outboard FX processors). The
signals routed to all the outputs may be defined in Focusrite Control.
2. OPTICAL INPUT – a TOSLINK connector carrying eight channels of digital audio in ADAT
format at 44.1/48 kHz sample rate or four channels at 88.2/96 kHz. These are simply additional
inputs to the Clarett 2Pre USB. This input is disabled at 176.4/192 kHz operation. This input is
also capable of accepting an optical S/PDIF source.
3. – USB-C™ connector; connect the Clarett 2Pre USB to your computer with either the
supplied USB-C to USB-C or USB-C to USB-A cable.
4. MIDI IN and MIDI OUT – standard 5-pin DIN sockets to connect external MIDI equipment. You
can send/receive MIDI data between your computer and external MIDI devices.
5. External DC power input – power the Clarett 2Pre USB via the separate AC adaptor (PSU)
supplied. The PSU is a 12 V DC unit rated at 1.5 A.
6. Power On/Off switch.
7. Kensington security slot– secure your Clarett 2Pre to a suitable structure if desired.