TView Silver User’s Guide
Chapter 6
41
&KDSWHU
Troubleshooting
This chapter describes possible problems that you might encounter
and ways to solve them.
Problem
•
Possible Causes/Solutions
No video from the
TView Silver
•
Check the connection from the computer’s video output
port to the monitor in port at the rear of the TView unit.
•
Check the connection from the comp video out port or
S-Video out port to the input on your monitor or VCR.
•
Ensure that the TV or VCR is ON.
•
Check the connection from the power supply. Is the
TView unit plugged in? Is the red power LED ON?
•
Ensure that your television or VCR has been
configured to accept auxiliary video input.
•
Ensure that the TView Silver is connected to the
appropriate video connector on your TV or VCR. At the
TV or VCR end, the cable should be connected to the
VIDEO, VIDEO IN, or AUX port.
Picture Rolls
•
Ensure that your secondary monitor and computer
monitor size are supported by the TView Silver
•
Check and adjust vertical hold and horizontal hold
controls on your TV/monitor.
Flicker, or other
Distortion on your
•
Use of an RF modulator may cause image quality
problems. If at all possible, avoid those devices that
