Chapter 2
13
Notes:
1. Before performing the steps to
connect the TView Micro to a laptop computer,
you must turn on the external video connector.
This is accomplished by using a particular key
sequence on the keyboard (for example, FN +
F11) or through the BIOS setup program. Refer
to your laptop owner's manual to determine
how the external video connector is turned on.
2. Ensure that you are using a Macintosh
PowerBook computer that has a connector for
an external monitor.
Perform the following steps to connect the TView
Micro to a PC or Macintosh Desktop or Laptop:
1.
Turn the computer and monitor off.
The computer must be off when connecting
the TView Micro. Connecting with the power
on could result in static damage to your
computer and video equipment.
2.
Disconnect the current monitor cable from the
"monitor out" port at the rear of the computer.
3.
Locate the Video In cable attached to the rear of the
TView Micro unit.
4.
For an IBM PC or compatible, connect the cable
connector located at the other end of the VGA Input
Содержание TView Micro
