Focus TView Gold PCI, Руководство пользователя

Страница: 25 / 57

TView Gold PCI User’s Guide
17
Video, you will need a special adapter called an RF
Modulator. This device converts the Composite Video
signal from the TView Gold PCI unit to an antenna signal.
The RF Modulator is not supplied.
Note: When using an RF Modulator, the TV may
have to be set to a particular channel (for
instance, 3 or 4) to accept the TView Gold
PCI’s video. Or, in some cases, you may have
to specify input using the TVs on-screen-
programming feature. If you are unsure about
how to set your television to accept external
video through the Antenna In, refer to the
television owner’s manual.
To connect the TView Gold PCI to your television
using the RF Modulator, perform the following steps:
1. Connect the RF Modulator to the coaxial input at the
rear of the television.
2. Connect one end of the composite video cable to the
matching port on the TView PCI board at the rear of
your computer.
3. Connect the other end of the composite video cable
to the RF Modulator’s Composite Input at the rear of
the television.
4. Plug RF modulator into wall outlet or surge protector