Focus ProHD DR-HD100, Руководство пользователя

Страница: 46 / 124

Quickstart
30 ProHD DR-HD100 Portable DTE Recorder
Do Not Disconnect Power or FireWire Cable
Never disconnect the power or the FireWire cable during a
recording. This will cause file corruption.
Loss of Power During Recording
If power is lost during recording it is possible to repair the
damaged file or files, refer “Repair Disk” on page 86 to and
“Repair Clip DV Mode only” on page 87.
Troubleshooting: Counter Not Incrementing
If the Counter does not increment while recording from the camera, it is
an indication that there is no active connection between the DR-HD100
and the camera.
• Verify that the DR-HD100 1394 DV I/O and the camera
connections are secure. It may be necessary to unplug and then
reconnect them.
When a good connection is made, the Counter increments and
recording starts.
Verify Record Mode Matches Source Video Content and Format
If in DV Recorder mode, HD content will not record properly. A NTSC or
PAL DV source records only on a matching NTSC or PAL unit.
Short Delay When Switching from VTR to Camera Mode
When switching a camcorder from VTR to camera mode, there is a
short (10-20 seconds) interval while the DR-HD100 re-establishes
communications with the camcorder. If recording is started during this
period, recording is delayed until the DR-HD100 finishes establishing
communications with the camcorder.