Focus MX-4, Руководство пользователя

Страница: 124 / 168

MX-4 U
SER
G
UIDE
C
HAPTER
13
120
11 Solder the wires of the other end of the cord to the poles from the tip and base of the stereo
mini-pin plug (
F ). If you aren’t sure which poles are which, ask at the store when you make the
purchase.
12 Plug your new remote trigger plug into the GPI jack on the MX-4 rear panel.
Using a GPI Trigger Device
If your edit controller is automatic and has a GPI trigger, you can trigger each page in a project
with the controller. You might need a special cable to connect the GPI jacks from the GPI device to
the MX-4.
WARNING
Always turn off power before plugging into any GPI jack.
The following instructions explain how to automatically trigger events using the device described
above. Instructions for other devices should be similar, but you should check the device instruc-
tions beforehand.
To use a GPI device as a trigger:
1 Connect the GPI device to the MX-4 using an appropriate cable.
2 Press the GPI trigger button when you want to trigger an event. You can trigger events
between scenes or anywhere in the middle of a scene. You can also trigger each event in a
Learned Script (refer to “Learned Scripts” beginning on page 101).
3 With the appropriate setup menu value, you can use the mixer to trigger other products (like a
Videonics TitleMaker).
R
ESETTING THE
MX-4 F
ACTORY
D
EFAULTS
When you first power up the MX-4, it operates using settings defined by FOCUS Enhancements.
As you go about using the MX-4 and changing its various settings, the unit stores your settings in
its memory (called NVRAM). You can reset all settings to their factory defaults.
To reset the MX-4 to its factory defaults:
1 Power down the unit (using the Power switch).
2 Press down and hold the
SHIFT
+
SETUP
/
FTP
buttons.
3 Turn on the MX-4’s Power switch.
4 After the unit powers up and you see the Preview screen, release all buttons.
NOTE
A factory reset will not restore the original background and foreground jpeg images included when
the unit is shipped. Refer to the included CD or the website
www.focusinfo.com to re-download the
original twelve inch design graphics if desired. Apply the
SHIFT
+
ROUTE
keys after powering
down the unit to remove all current jpeg images on the system if desired before powering up again
to import new ones.