iTView Mac User’s Guide
20
Hardware Installation
Connecting the iTView Mac to a VCR
In certain configurations, the video will be run through a VCR.
Therefore the unit must be connected to the VCR. By connecting the
iTView Mac unit, you will also be able to record the computer screen
to videotape.
To connect your iTView Mac to a VCR, perform the following
steps:
1.
Connect one end of the supplied composite video cable to the
“Comp Video” port located on the side of the iTView Mac unit, or
connect the male end of the S-Video cable to the port on the
side of the iTView Mac labeled "SCART/S-Video.”
2.
Connect the other end of the composite cable or S-Video cable
to the port at the rear of your VCR labeled "Video Input" or
“AUX-IN,” “AV-IN,” or “S-VIDEO IN.”
3.
Turn on the VCR.
4.
Turn on your television and tune it to channel 3 or 4.
5.
Plug in the power supply for the iTView Mac.
6.
Turn the computer on.
7.
Find a button on the front of the VCR called "Line," "TV/Video,"
"Video Input," or something similar. Press the button. If the
cables have been connected correctly, the image from the
computer monitor should now appear on the television screen.
