iTView Mac User’s Guide
Chapter 2
13
Installing the RGB Cover on your iMac (Older
Models)
To obtain access to the RGB port on your iMac DV you will need to
install the RGB Cover on the rear of the computer. The following
outlines the procedure for removing the standard cover and installing
the RGB cover
.
Comparison of covers
Perform the following steps to install the RGB Cover on your
iMac:
1.
Turn off your iMac and unplug the power cord from the wall. If
your internal modem is connected to a telephone line,
disconnect the telephone line from the modem.
2.
Place a soft cloth or towel large enough to cover the front of the
iMac on a desk, table, or other flat surface.
3.
Carefully, place the computer, screen down, on the cloth.
Standard Cover
RGB Cover