8.0 INSTALLATION WALL MOUNTED - CONTINUED
9.0 OPERATING THE APPLIANCE
GB IE
8
©
2019 Focal Point Fires plc.
The control panel is on the right side of the unit.
When a function is changed from the control panel or remote there will be a corresponding indicator displayed. The indicator shows the
function changed and the level selected. When the function is turned off, the corresponding indicator will fade off.
Securing the front fascia.
1. Locate the hole on both left and right sides and insert a
screw through the hook, into the fireplace insert.
2. Tighten screw to pass it through the hook, on both sides.
3. Ensure the front fascia is secure.
Note: Tighten up the screw carefully, to avoid damage to the
front panel.
1. ON/OFF
2. HEATER
3. TIMER
4. BRIGHTNESS
5. CHILD SAFETY LOCK
6. PLUS
7. MINUS
1.
3.
6.
5.
4.
2.
1.
2.
3.
4.
7.
Power Button
This button will not only put the fireplace insert in a standby mode, but also you
can see the flame effect through the screen. This will turn off all functions at once.
Heater
The fireplace contains a fan forced heater.
The default setting temperature is 72°F (22°C).
The thermostat setting range is 50°-86°F or 10°-30°C.
The thermostat is adjustable by 2°F or 1°C increments.
To change between °F and °C press and hold the Heater button for 5 seconds.
Timer
Pressing the timer button repeatedly will cycle through the following timer
settings: 30 minutes, 1 hour, 2 hr, 3 hr, 4 hr, 5 hr, 6 hr, 7 hr, 8 hr and off.
The fireplace will automatically turn off when the timer reaches zero minutes.
1.
