Focal POWER 1.800 Скачать руководство пользователя страница 11

-  Insert  the  new  fuses  in  the  fuse  holder.  Make  sure  that  the  new  fuse  rating  corresponds  to  the  product 

specifications. 

- Put the bottom cover back on and secure it with the screws then screw. 
- Turn the amplifier back into position with its bottom facing the attachment surface. 
- Screw in the fixing screws of the amplifier. 
- Connect the positive terminal of the battery powering the amplifier.

3.8 -

 Tin the end of the power supply cable before you connect it to the battery’s positive (+) terminal. Weld 

the end of the cable to the terminal lug that is going to be used for the battery’s positive (+) terminal. Connect 
the terminal lug to the battery’s positive terminal.

3.9 -

 Insert the fuse into the fuse-holder(s), and screw in tightly.

3.10  -

 Connect the loudspeaker cables to the right and left channel crossover networks, making sure that 

the polarities are the same (note: + = cable with a red border if you are using a Focal kit) as those used for 
standard cabling set-ups. Focal amplifiers can operate in bridged mode (see product specifications page 19) 
for amplifying subwoofers. To do so, simply connect the positive (+) loudspeaker cable to the left channel’s 
(“LEFT”) positive (+) binding post terminal and connect the negative (-) loudspeaker cable to the right channel’s 
(“RIGHT”) negative (-) binding post terminal.

WARNING

If you are connecting several subwoofers to a single output, check that the amplifier’s impedance rating is 
compatible (p 19). 

3.11 -

 The connection phase has now been completed. Now all you need to do is to check that you have the 

right power supply and verify that the overall set-up – car radio + amp loudspeakers – works properly. 
Set all gains (both source gains and amplifier gains) to their minimum levels. Switch on the various parts of the 
system. Once you have switched on all of the parts, test the system at low sound level. 

fig. 9

11

installation

notice amplis focal power gb.ind11   11

notice amplis focal power gb.ind11   11

28/09/06   16:11:58

28/09/06   16:11:58

Содержание POWER 1.800





















































Отзывы: