Polyglass Enclosures Manual
Connections for SB 21 V2
Connections for SB 27 V2, SB 33 V2, SB 40 V2
Four connections possibilities :
Impedance: 4 ohms.
Parallel connection using a mono amplifier
It is essential not to forget to link the two coils together with
the link straps supplied. Always verify with the amplifier user
manual that it can accept a low impedance of 2 ohms.
In addition, check if a multi channel 2
/
4 ways model,
bridging into mono is available.
Impedance: 2 ohms.
Series connection using a mono amplifier
Remove the straps and link together the connections
as indicated.
Impedance: 8 ohms.
Connection using a stereo amplifier
Remove the link strapes, ensuring there is no short circuit
direct to the amplifier.
Impedance: 2x4 ohms.
Connection to two separate amplifiers stereo or mono
(bridged together)
Remove the link strapes, ensuring there is no short circuit
direct to amplifier. Always ensure the two amplifier selected
are the same (spec
/
power brand etc...). This is important so
the dual windings of the voice coil receive the same quality
of signal. They remain equal to each other.
Impedance: 2x4 ohms.
8
notice caisson polyglass 8
11/02/04, 14:08:09
