Focal FP Dual Direct, Руководство пользователя

Страница: 7 / 36

3 - Cabling
WARNING
If there is a doubt as to your ability to install the amplifier and to cable the system properly, get a
Focal distributor to do it for you.
WARNING
Before you begin the connection phase of set-up, remove the vehicle battery’s negative (-) terminal (fig. 1).
CAUTION
Avoid routing power supply cables close to low-level input cables (RCA), to your car’s radio aerial, or to
sensitive units. High-current power supply cables can cause static/interference that affects audio signals.
CAUTION
Keep cables as short as possible to optimise the system’s set-up performance and to reduce
signal loss.
3.1 - What power supply wire gauge should I use?
Amplifier Main fuse Length of Cable in Metres
0 - 4m 4 - 8m
FP Dual Direct 160A
35mm 2 53mm 2
2AWG* 0AWG
*AWG : American Wire Gauge
I N S T A L L A T I O N
7
notice dual direct gb.indd 7 notice dual direct gb.indd 7 20/03/07 14:33:42 20/03/07 14:33:42