Focal FP Dual Direct, Руководство пользователя

Страница: 14 / 36

T E C H N I C A L S P E C I F I C A T I O N S
14
FP Dual Direct
Nominal power measured at 13.8V
continuously @ 4Ω 2 x 250WRMS
Nominal power measured at 13.8V
continuously @ 2Ω 2 x 400WRMS
Power in bridge mode measured at
13.8V continuously @ 4Ω 1 x 800WRMS
Power in bridge mode measured at
13.8V continuously @ 2Ω 1 x 1200WRMS
Power supplies Dual fully regulated
Signal/noise ratio > 110dB (A)
Damping factor at 4Ω > 600
Frequency response 10Hz – 40kHz
Input impedance 13kΩ
Input sensibility 0.2 – 5V
Analog input RCA
Output stages Transistors :
6 x Toshiba 2SC5200
6 x Toshiba 2SA1943
Operational amplifiers Burr-Brown®
Maximum cross section of loudspeaker
cables 10mm 2
7AWG
Maximum cross section of power cables 53mm
2
0AWG
Protections Short-circuit
Continual power
Over-heating
Clipping limiter
Overvoltage
Polarity reversal
Dimensions (H x W x D) 50 x 540 x 280mm (2 x 21.25 x 11“)
Weight 7.5kg (16.53lb)
Comment: In our endeavour to continually improve our products, Focal reserves the right to modify the technical specifications of this product without prior notice.
notice dual direct gb.indd 14 notice dual direct gb.indd 14 20/03/07 14:33:44 20/03/07 14:33:44