Focal BOMBA 20 A1, Руководство пользователя

Страница: 3 / 20

Mounting
A power supply kit dedicated to the BombA cabling will shortly be available at your supply.
• Unplug the “+” from the battery
• Make sure you follow the car manufacturer instructions (airbag, alarm system, computer,
immobiliser ...).
• Always use battery lead connections.
Cable routing
The 12V supply cables should be passed down one side of the vehicle and the signal
cables down the other. These cables must be suitably protected to avoid any damage to the
insulation, especially when feeding the cable through from the engine compartment to the
passenger cabin.
Installation
We have taken time to design a product that will work exceptionally well. To add to this we
have included a fixing kit to ensure the subwoofer remains securely mounted. Please follow
the below mentioned steps to ensure the subwoofer is mounted correctly.
1 - Rear seats must be positioned in their normal fixed position.
2 - Decide the best location possible that suits your automobile and space available. We
recommend the best location for optimum sound quality and most secure is to position
behind the rear seats, in the trunk of the automobile. It can be positioned in either left
centre or right side locations. This will not change the sound quality, as bass frequencies
are not directional.
3 - Ensure the area for subwoofer location is clean and tidy. Any loose objects are removed, as
they could knock and damage the subwoofer, and this is not covered by the warranty.
4 - Once the location has been decided, carefully attach the fixing template with scotch tape
(fig. 1)
.
5 - Now mark the screw hole positions for the fixing brackets. (Please verify with template).
6 - Drill two holes 2 mm for the 4 fixing brackets, at your defined locations. It is advisable
that the drill depth be reduced to a minimum length, so to prevent drilling to deep into the
textile of the seat
(fig. 2) .
7 - Now carefully position the brackets and one screw per bracket into place (fig. 3) .
8 - Now take the two fixing straps and thread through the aperture available on the fixing
bracket
(fig. 4)
and position the second screw on each bracket.
3
BombA 20 A1 User Manual
notice bomba 20 a1 3 27/09/06, 16:08:39