8.0 INSTALLATION - CONTINUED
GB IE
Installing the wall plugs into the wall.
1. Offer the appliance up to the wall in it’s desired location.
Draw a mark where you wish to connect the strap in to the
wall. Remove the appliance from the position and drill 1x hole
(5.5mm diameter, 40mm deep).
Please note: Before drilling into walls, always check that
there are no hidden wires, pipes, etc. Make sure that
screws and wall plugs supplied are suitable for
supporting the unit in your surface. Consult a qualified
person if you are not sure
5
©
2015 Focal Point Fires plc.
Inserting the wall plug into the wall.
Gently hammer the wall plug into position.
Installing the appliance to the wall
Using a screw driver screw through the fixing strap and into the
wall plug you have just installed into the wall. Securing the
appliance into place.
